Product

Maeda Koki MKTV type OIL SIGNAL

Home > Manufacturer > MAEDA KOKI > Oil Signal >

MKTV type OIL SIGNAL

  [ Flow rate can be seen with the naked eye ] because you are using a transparent tapered tube, with a display red line ball (or float) 　 it is possible to check the approximate flow rate by looking at the relationship between position. [ Flow rate with adjustable valve ] to adjust the miniature valve, ball (or float) to the position of the display red lines 　 can be set the required flow rate of by keying. [ Mounting orientation does not matter ] 　attitude of when mounting because it uses a spring inside the upward and downward and 　can be done sideways, etc. freely.
　


　



 

Model List 
 Model     Dimensions (mm)  The maximum flow rate 
(L / min)
 Connection full length  Full width  Depth 
Root 
same 
included
seen 
form		 MKTV25-1TL  Rc1 / 8 94 twenty five 51 Three
MKTV25-2TL Rc1 / 4 94 twenty five 51 Three
MKTV25-3TL Rc3 / 8 99 twenty five 51 Four
Copper 
tube 
for		 MKTV25-4 φ4 110 twenty five 51 1.5    
MKTV25-6 φ6 112 twenty five 51 Three
MKTV25-8 φ8 114 twenty five 51 Five
MKTV25-10 φ10 119 twenty five 51 Five
When ordering, quote □ Please specify the inside of.　
Model 
MKTV □□ - □ TL		 Oil of type □ 
(or the viscosity of the oil □ CSt)		  Regular flow rate 
□ L / Min
Example: MKTV25-2TL oil types ISOVG32 regular flow 3L / Min ※ is the type of case of connection R male thread will be MKTV25- □ TOL. Example: MKTV25-3TOL standard specification (screw-type)



 fluid oil
 Connection 
(outlet side)		 Rc female thread  Changes to the R male thread is also available. 
Connection of the valve is the only R male thread. 
 Heatproof temperature Maximum 80 ℃ - 
 Breakdown 1MPa -
Material Transparent tapered tube acrylic -
Fittings C3604 (brass) -
spring SUS304 -
Nylon ball Nylon 66 You may need to use a cylindrical float.
 Miniature valve BC  Production in the lock nut with a valve is also possible.
Standard specification (for copper tube)
 fluid oil
 Connection 
(outlet side)		 See above - 
 Heatproof temperature Maximum 80 ℃ - 
 Breakdown 1MPa -
Material Transparent tapered tube acrylic -
Fittings C3604 (brass) -
Hexagon cap nut  C3604 (brass) - 
 Chuck sleeve Cu  - 
spring SUS304 -
Nylon ball Nylon 66 You may need to use a cylindrical float.
 Miniature valve BC  -